WINDOWS AND DOORS
As a standard, the scantlings are multi-glued with D4 glue as per EN 204.
Therefore, we can guarantee the highest quality.
Fir – lat. Abies alba (ABAL)
Colour variations that are typical for this wood species, multi-glued with D4 glue as per EN 204, basically defectfree, vertical/ semi vertical grain, block profile, kiln-dried. Also available with PEFC™ certificate!
Beech – lat. Fagus sylvatica (FASY)
Made of steamed beech, no warranty for species-specific warping, natural colour variations as permitted for beech, multi-glued with D4 glue as per EN 204, kiln-dried. Also available with PEFC™ certificate!
Siberian larch – lat. Larix spp. (LAER, LADC, LAXX)
Certified by i.f.t.-Rosenheim*, colour variations that are typical for this wood species, basically defectfree, vertical/semi vertical grain , multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® certificate!
European larch – lat. Larix spp. (LAER, LADC, LAXX)
Certified by i.f.t.-Rosenheim*, colour variations that are typical for this wood species, basically defectfree, vertical/semi vertical grain, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with PEFC™ certificate!
Spruce – lat. Picea abies (PCAB)
Certified by i.f.t.-Rosenheim*, pin knots and resin pockets that are characteristic features of spruce cannot be excluded, basically defectfree, vertical/semi vertical grain , multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC™ certificate!
Pine – lat. Pinus sylvestris (PNSY)
Certified by i.f.t.-Rosenheim*, basically defectfree, vertical/semi vertical grain, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC™ certificate!
Oregon Pine– lat. Pseudotsuga menziesii (PSMN)
Certified by i.f.t.-Rosenheim*, basically defectfree vertical/semi vertical , multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with PEFC™ certificate!
Hemlock– lat. Tsuga heterophylla (TSHT)
Mineral streaks and bark pockets that are characteristic features of Canadian hemlock cannot be excluded; basically defectfree, vertical/semi vertical grain, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with PEFC™ certificate!
Sipo Mahogani – lat. Entandrophragma utile (ENUT)
Multi-glued with D4 glue as per EN 204, block profile, kiln-dried; partial quantities are also available with FSC® certificate on request!
Eucalyptus globulus – lat. Eucalyptus globulus (EUGL)
Bulk density is 850 kg+, small well-ingrown knots and grains that are characteristic features of Galician eucalyptus cannot be excluded, vertical/semi vertical grain,multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC™ certificate!
European Oak – lat. Quercus spp. (QCXE, QCXA)
Natural colour variations as well as sapwood portions cannot be excluded also on exposed surfaces; multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC™ certificate!
American white oak – lat. Quercus spp. (QCXE, QCXA)
Natural colour variations as well as sapwood portions cannot be excluded also on exposed surfaces; multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC™ certificate!
Meranti – lat. Shorea spp. (SHDR, SHLR)
Bulk density 450 kg+, multi-glued with D4 glue as per EN 204, block profile, kiln-dried, available lengths. Also available with PEFC™ certificate!
Sapeli – lat. Entandrophragma cylindricum
Multi-glued with D4 glue as per EN 204, block profile, kiln-dried.
ACCOYA® – lat. modified Pinus radiata
Accoya® cover plies with a thickness of at least 22 mm, falling structure, strong colour variations and batten stripes that are typical for Accoya® cannot be excluded and do not justify complaints; suitable for opaque coating (outdoors!) Accsys recommends all parts, such as screws and hardware, that have contact with the wood and the remaining vinegar acid in the wood are made of stainless steel. The plies are glued with PU adhesive; no finish planing is applied after gluing. (PU adhesive might escape at the edges!) Available as pure Accoya® scantling or combined with pine or spruce, in rifts/half rifts.
Also available with PEFC™ certificate!
ACCOYA®/spruce – lat. modified Pinus radiata/Picea abies
Accoya® cover plies with a thickness of at least 22 mm, falling structure, strong colour variations and batten stripes that are typical for Accoya® cannot be excluded and do not justify complaints; suitable for opaque coating (outdoors!) Accsys recommends all parts, such as screws and hardware, that have contact with the wood and the remaining vinegar acid in the wood are made of stainless steel. The plies are glued with PU adhesive; no finish planing is applied after gluing. (PU adhesive might escape at the edges!) Available as pure Accoya® scantling or combined with pine or spruce, in rifts/half rifts.
Also available with PEFC™ certificate!
ACCOYA®/pine – lat. modified Pinus radiata/Pinus sylvestris
Accoya® cover plies with a thickness of at least 22 mm, falling structure, strong colour variations and batten stripes that are typical for Accoya® cannot be excluded and do not justify complaints; suitable for opaque coating (outdoors!) Accsys recommends all parts, such as screws and hardware, that have contact with the wood and the remaining vinegar acid in the wood are made of stainless steel. The plies are glued with PU adhesive; no finish planing is applied after gluing. (PU adhesive might escape at the edges!) Available as pure Accoya® scantling or combined with pine or spruce, in rifts/half rifts.
Also available with PEFC™ certificate!
Münchinger Energyline spruce – lat. Picea abies
Cover plies made of spruce, pin knots and resin pockets that are characteristic features of spruce cannot be excluded, basically defectfree, vertical/semi vertical grain, intermediate ply made of high-density insulating material with a lambda value of 0.04 W/m²K, consisting of individual plies of 2.15 m each, laid next to each other with a butt joint without gluing; cutting residues are also integrated; spruce real-wood lipping on one side, multi-glued with PU adhesive. Also available with PEFC™ certificate!
Münchinger Energyline pine – lat. Pinus sylvestris
Cover plies made of pine; intermediate ply made of high-density insulating material with a lambda value of 0.04 W/m²K, consisting of individual plies of 2.15 m each, laid next to each other with a butt joint without gluing; cutting residues are also integrated; pine real-wood lipping on one side, multi-glued with PU adhesive.
Münchinger Duoline Oregon Pine/spruce
Basically defectfree, vertical/semi vertical grain, one cover ply made of Oregon pine, other plies made of spruce, pin knots and resin pockets that are characteristic features of spruce cannot be excluded; multi-glued with D4 glue as per EN 204; block profile, kiln-dried. Also available with PEFC™ certificate!
Münchinger Duoline Oregon pine/pine
Basically defectfree, vertical/semi vertical grain, one cover ply made of Oregon pine, other plies made of pine, multi-glued with D4 glue as per EN 204. Also available with PEFC™ certificate!