Classic post and beam constructions
The Classic post-and-beam construction is based on a multi-layer block profile with a 24 mm grid, which is suitable for timber and timber-aluminium façades.
The outer layers are finished in vertical or semi vertical grain quality, while the inner layers may also contain flat-cut wood.
The use of D4 adhesive in accordance with EN 204 ensures a load-bearing, multi-glued structure that remains reliably dimensionally stable. The profile is kiln dried, which enables precise further processing.
It is particularly suitable for façade systems where stability and structural safety are paramount.
Information and wood types for Classic post and beam constructions
Fir – lat. Abies alba (ABAL)
Colour variations that are typical for this wood species, multi-glued with D4 glue as per EN 204, basically flawless, rifts/half rifts, block profile, kiln-dried. Also available with PEFC certificate!
Beech – lat. Fagus sylvatica (FASY)
Made of steamed beech, no warranty for species-specific warping, natural colour variations as permitted for beech, multi-glued with D4 glue as per EN 204, kiln-dried. Also available with PEFC certificate!
European Larch – lat. Larix spp. (LAER, LADC, LAXX)
Colour variations that are typical for this wood species, basically flawless, rifts/half rifts, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with PEFC certificate!
Spruce – lat. Picea abies (PCAB)
Pin knots and resin pockets that are characteristic features of spruce cannot be excluded, basically flawless, rifts/half rifts, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC certificate!
Pine – lat. Pinus sylvestris (PNSY)
Basically flawless, rifts/half rifts, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC certificate!
Oregon Pine – lat. Pseudotsuga menziesii (PSMN)
Basically flawless, rifts/half rifts, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with PEFC certificate!
Hemlock – lat. Tsuga heterophylla (TSHT)
Mineral streaks and bark pockets that are characteristic features of Canadian hemlock cannot be excluded; basically flawless, rifts/half rifts, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with PEFC certificate!
Sipo Mahagoni – lat. Entandrophragma utile (ENUT)
Multi-glued with D4 glue as per EN 204, block profile, kiln-dried; partial quantities are also available with FSC® certificate on request!
Eucalyptus Globulus – lat. Eucalyptus globulus (EUGL)
Bulk density is 850 kg+, small well-ingrown knots and grains that are characteristic features of Galician eucalyptus cannot be excluded; rifts/halfrifts, multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC certificate!
American White Oak – lat. Quercus spp. (QCXE, QCXA)
Natural colour variations as well as sapwood portions cannot be excluded also on exposed surfaces; multi-glued with D4 glue as per EN 204, block profile, kiln-dried. Also available with FSC® or PEFC certificate!
Meranti – lat. Shorea spp. (SHDR, SHLR)
Bulk density 450 kg+, multi-glued with D4 glue as per EN 204, block profile, kiln-dried, available lengths: 3.00 m and more. Also available with PEFC certificate!
Sapeli – lat. Entandrophragma cylindricum
Multi-glued with D4 glue as per EN 204, block profile, kiln-dried.